POLYMIN
Our POLYMIN is specially developed as a lining for silos, hoppers, tanks, containers, wagons, dump trucks, and truck beds, to extend equipment life by preventing wear and facilitating the flow and discharge of bulk materials in the mining and industrial sectors.
It is a high-performance polyethylene, enhanced with different fillers and additives depending on its specific application, improving product flow and sliding behavior. It also improves unloading by preventing material build-up in critical areas of the containers. POLYMIN offers significant advantages over steel due to its long-lasting durability, lighter weight, and significantly lower installation and maintenance costs.
POLYTEC 500 HMW
High density and high molecular weight sinterpressed polyethylene.
It is primarily aimed for the chemical, mechanical and food industry.
The main characteristics of this product are:
- Stiffness
- Mechanical damping capacity.
- Good mechanical resistance.
- Good impact resistance.
- Good resistance to chemicals.
- Good resistance to abrasion.
- Resistance to very low temperatures.
- Very low absorption of moisture.
- Good sliding capacities.
- Weld ability.
- No electrical conductivity.
- Recyclable 100%.
* For less rigorous wear applications, it is an economical alternative to the POLYTEC 1000 UHMW.
POLYTEC 500 HMW
POLYTEC 500 HMW UV
POLYTEC 500 HMW UV
POLYTEC 500 HMW UV is a high density, high molecular weight pressed polyethylene with low moisture absorption.
This material incorporates, in addition to the characteristics of our POLYTEC 500 HMW, a series of additives that provide a great absorption of ultraviolet light, in addition to antioxidants that protect against thermal degradation. It also has excellent crack resistance in the active environment (ESCR).
It is an optimal product for use, for example, in street furniture, playgrounds, outdoor decoration, facades, etc.
POLYTEC 500 HMW UV
POLYTEC 1000 UHMW
Sinterpressed polyethylene of high density and ultra high molecular weight.
Directed mainly to applications with great mechanical, chemical and thermal requirements.
The main characteristics of this product are:
- Rigidity.
- Mechanical damping capacity.
- Minimum coefficient of friction.
- Excellent mechanical resistance.
- Excellent impact resistance.
- Good resistance to chemicals.
- Excellent resistance to abrasion.
- Resistance to very low temperatures.
- Very low absorption of moisture.
- Good sliding capacities.
- No electrical conductivity.
- Recyclable 100%.
POLYTEC 1000 UHMW
POLYGLASS
POLYGLASS is an ultra-high molecular weight polyethylene (PE-UHMW), made with glass microspheres, developed specifically for contact areas with very high abrasion and wear. In addition, its excellent dimensional stability is very useful when machining parts that require great precision.
This product is especially intended for the paper and ceramic industry.
POLYGLASS
POLYMoS2
POLYMoS2 is an ultra high molecular weight (PE-UHMW) pressed polyethylene with Molybdenum Bisulfide (MoS2) which offers a very good coefficient of friction and remarkably improves abrasion resistance, giving it a very good sliding capacity.
This product is specially designed for sliding ramp applications for the Aero/Port industry.
POLYMoS2
POLYTEC 500 REG
As a commitment to environmental protection policies, our POLYTEC 500 REG. Is a high molecular weight polyethylene pressed from the recovery of 100% of our surplus (cuttings, chips) and recycled in our own production plant.
For its properties, it is an economical alternative to our POLYTEC 500 HMW for applications with less mechanical demands.
The POLYTEC 500 REG. Is especially recommended for its characteristics for use in the mechanical sector, port industry, crane stands and for the industry in general.
POLYTEC 500 REG
POLYTEC 1000 REG
From the recovery of 100% of our surplus production of polyethylene of very high molecular weight and a very careful selection of the same in our recycling plant, we obtain the POLYTEC 1000 REG.
Due to its characteristics and its low cost, it is a very good alternative to our POLYTEC 1000 UHMW.
Its use is indicated in the most diverse fields, for example in the mechanical and automotive industry, in the airport industry, mining, lining of trucks and hoppers, etc.
POLYTEC 1000 REG
- Natural
- Lichtblau - RAL 5012
- Schwarz
- Gute Gleiteigenschaften
- Gute Schlagfestigkeit
